How to keep pipes from freezing

Over a quarter of a million homes experience frozen pipes each winter. Frozen pipes are expensive to repair plus your home and contents may be ruined. In a matter of minutes, a one-eighth inch crack can release 250 gallons of water and disrupt your life in ways you may never imagine.
You can learn how to protect your pipes from freezing before the sub-zero temperature and cold winds destroy your water pipes.

As summer draws to a close you should be thinking about the coming winter.

Is your home ready for the first frost?

What can you do to prepare to ensure your pipes don’t freeze and burst this year?

Know where the main water shut off valve is to your home. This will enable you to shut the water off to the house should one of the pipes freeze and burst. The quicker you can get the water shut off, the less damage will be done. This will also give you time to call the plumber for help.

Find out where the water pipes are located in your home. In most cases, they will be in the crawl space under your home or possibly in your attic. Once you’ve found exposed pipes, wrap them with insulation. The more protective insulation you can wrap around them, the less likely they are to freeze and burst.

In extremely cold temperatures you may also want to use thermostatically-controlled heat cables. Wrap and install insulation according to the manufacturer’s instructions. . Underwriters Laboratories, Inc. independently tests and approves these cables; be sure to use only those which have been UL approved.

Seal up Leaks

Take the time to seal up any leaks around the pipes which may be allowing cold air into the area where the pipes are exposed. This could mean checking around electrical wiring which comes through the walls, dryer vents and the pipes themselves. Use flexible insulation, caulk or a can of expandable foam insulation. By blocking as much air as possible you’ll lessen the chance of the pipes bursting.

Disconnect and remove any garden hoses which won’t be used during the winter. Turn the valve off to the spigot and drain all of the water from the faucet.

If you must leave a faucet active for whatever reason, remove the garden hose between uses. You can also put an insulated cap over the faucet to keep it from freezing.

When the temperatures are expected to get especially frigid, leave a trickle of hot and cold water running in at least one sink which is on an outside wall.

Allow cabinet doors with un-insulated pipes under it to remain open. This will allow the warm air from the house to heat the pipes and keep the pipes from freezing.

Keeping the thermostat to your home set no lower than 55 degrees Fahrenheit when your not home and then ask family or a neighbor to check on your home periodically while you’re gone will ensure the temperature doesn’t fall too low.

No one wants to experience a burst water pipe. By getting ready for the first frost you’ll be well on your way to avoiding one.